Yamato Scientific
DP-83C
220V Programmable Vacuum Drying Oven, 18 Cubic Ft.
Large scale vacuum drying oven designed for treatment of large-sized parts.
- Vacuum pump can be installed inside the oven
- Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance
- Because the exhaust system is improved to significantly shorten the time to reach vacuum, working efficiency is improved.
- Use specialized function menu key and ▲/▼ key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc.
- Self-diagnostic functions (abnormal temperature sensor, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, ELB to prevent overcurrent, key lock, etc.
- For safety, resin protection panel is installed at the observation window
Special Price
$26,482.50
Regular Price
$29,425.00
- Method: Decompression - chamber wall heating
- Operating Temp. Range: 40~200°C
- Operating Vacuum Range: 101~0.1kPa (760~1Torr)
- Temp. Adjustment Accuracy: ±1.0°C (at 200°C)
- Interior: Stainless steel plate
- Exterior: Cold rolled steel plate with chemical proofing coating
- Insulating Material: Glass fiber
- Heating Method: Decompressed chamber wall direct heating
- Heater Power: 6.5kW
- Observation Window: Toughened glass + resin protection panel
- Vacuum Gauge: Pointer type, -100~0kPa
- Vacuum Pump Installation Room: Yes
- Temp. Control: 3 segments PID
- Temp. Setting: Use specialized function menu key and up/down key to set
- Temp. Display: Measured temp. display: green 4-digit LED digital display
- Setting temp. display: red 4-digit LED digital display
- Timer: 1min-99 hr 59 min and 100 hr-999 hr 50 min (attached with timing wait function)
- Operation Function: Fixed temp. auto start, auto stop, program operation
- Program Mode: Program operation 3 segments 30 steps (30 stepsx1, 15 stepsx2, 10 stepsx3)
- Additional Function: Deviation correction, key lock, power outage compensation
- Heater Circuit Control: SSR driving
- Sensor: K thermocouple (temp. controller and overheat protector)
- Safety Device: Self-diagnosis circuit (abnormal temp. sensing, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, EBL to prevent overcurrent, key lock, etc.
- Internal Dimensions WxDxH: 800x800x800 mm
- External Dimensions WxDxH: 1020x1020x1850 mm
- Internal Capacity: 512L
- Air Exhaust Port: NW40 flange
- Air Suction Port: Rc 3/8
- Power Source (50/60Hz) Rated Current: AC220V 31.5A (no plug, round terminal)
- Weight: ~450kg
- Accessories: Stainless steel punching plates, 2 pcs.
- Optional: Shelf plate, vacuum pump, N2 introduction device, recorder, alarm indicator lamp (stand-by/running/malfunction), external communication (RS485), temp. output terminal (4~20mA), Output terminal for external alarm, time up output terminal
| SKU | I378154 |
|---|---|
| Mfg. Part Number | DP-83C |
| Manufacturer | Yamato Scientific |
| Temperature Range | 40° to 200°C |
| Input | 220V |
| Type | Vacuum |