Yamato Scientific
RE-301-BW
115V Digital Rotary Evaporator, includes Water Bath
Yamato rotary evaporators were designed for ease of use. Each unit comes standard with digital display for both bath temperature and rotational speed, allowing you to record and repeat parameters easily. The movable rotary joint accommodates different size glassware and allows for a change in the contact position of the vacuum seal. Quick release evaporating flask allows for easier addition and removal of sample. Built-in safety feature shuts off rotary evaporator if abnormalities are detected.
$4,060.00
- Motor: DC brushless motor (for rotation) and Rod Actuator (for lifting)
- Rotation Speed: 20-250 r/min (rpm)
- Lift Stroke: 130mm
- Speed Setting (rpm): Control knob (digital indication)
- Safety Function: Circuit breaker, Rotor overload protection, Lower limit lift stopper, Lift rise switch at blackout
- External dimension with Glassware B(mm): 643(W)x 400(D)x727(H)(857(H) when raised)
- Power source 50/60Hz: Main unit: AC100~240V 1.5A
- Accessories: Water or oil bath (1), Instruction manual (1) Warranty card (1), Battery (9V) (2)
- VR300 Vacuum Sensor: 0 to 981hPa
- VR300 Setting Range of Vacuum: 0 to 981hPa
- VR300 Measurable Range of Vacuum: 0 to 1033hPa
- VR300 Resolution of Vacuum: 1hPa
- VR300 Setting Range of Hysteresis: 1 to 50hPa
- VR300 Operation Modes: Customer-programmed, presetting, presetting with timer, progressive, and progressive with timer modes
- VR300 Preset Operation: 1 to 999 minutes
- VR300 Progressive Operation: 1 to 999 minutes
- VR300 Safety Measures: Self-diagnosis, alarm
BM-500 Bath
- Operating Temp. Range: Room temp. +5°C to 90 °C
- Temp adjustment accuracy: ±1.5°C (When stirring)
- Control system: PID control by microprocessor
- Set-up system: Digital setting by key
- Extra function: Key log function, SE signal transmission and reception, power failure guarantee operation, calibration offset
- Sensor: K-thermocouple
- Heater: 1kW (at 100V) 1.44kW (at 120V)
- Safety countermeasures: Protection cover for bath. Self-diagnostic functions (Automatic overheat prevention, Sensor trouble, Triac short circuit, heater burn out, main relay failure), socket breaker, thermal fuse
- Interlock control function: Automatic control signal receive by RE600/800 controller, Error report to RE600/800
- Bath Capacity/Material: 4 L
- Water Tank: Ø 240 x bottom 165 X depth 122mm
- External dimensions(WxDxH mm): 340 x 349 x 231
- Power source: AC100V-120V 10.5 - 12.5A (15A)
- Weight: Approx. 5.5kg
- Accessories: Bar thermometer (10 to 110deg.C) with immersion line
| SKU | I347755 |
|---|---|
| Mfg. Part Number | RE-301-BW |
| Manufacturer | Yamato Scientific |
| Adjustment | Digital |
| Input | 115V |
| Includes | Water Bath |